Powerflush your central heating system with powerflushing Aylesbury, Oxford and Milton Keynes engineersShaw’s plumbing and heating only use the very best in powerflushing equipment, kamco powerflushing machines are the number 1 at cleaning your central heating system and with the chemicals we use, can usally be done within one visit.
The power flushing engineers in Aylesbury, Milton Keynes, Oxford and surrounding areas have been fully trained by kamco at there head office in St Albans and are ready to take on any heating system that may be sludged up or not heating up properly.
We also use the kamco combimag filter and heater which increases the speed of cleaning your heating system, so that we dont waste your whole day.
To book a powerflush on your central heating system call 0800 8 247 585 or 0333 444 8 247 or book online and ask to recieve a 5% discount.
If your heating system is having any of the following symptoms below then call us.
WHAT ARE THE SYMPTOMS OF A SYSTEM IN NEED OF A POWERFLUSH ?
High heating bills – Noisy heating system – Kettling noises from boiler – Radiators have cold spots – System slow to warm up – Radiators need regular bleeding – Pump failures – Evidence of sludge and rust in header tank – Heating not working – Radiators with pin holes – Radiator water dirty when bleeding rad.
WHAT IS THE SOLUTION ?
Your system needs a professional power flush, using a power flush machine and chemicals we will flush and leave your heating system working as good as new and fully protected by adding system inhibitor.
WHAT ARE THE BENEFITS OF HAVING MY HEATING SYSTEM POWERFLUSHED ?
Lower heating bills, save up to 25% – Faster heat up times – Full surface of radiators heating up your home – Extended lifespan of heating system – Better flow circulation and a quieter system – Rust protection – Cleans the whole system – Prevents further corrosion
HOW LONG WILL IT TAKE ?
A professional power flush will usually take four to seven hours, depending on how bad your system is and how many radiators are on your system, the engineers can advise you on site.
WHAT HAPPENS DURING A KAMCO CENTRAL HEATING POWERFLUSH?
The clearflow power flushing machine is simply connected in to the central heating system either by connecting to the pump valves or by removing one radiator and connecting to the radiator valves.
Power flushing is highly effective way of cleaning your heating system as it works by pumping water with added chemicals around the system at a much higher velocity than usual causing the debris to break up and loosen and then is purged from the system with clean water, at the end an inhibitor is add and circulated around the system for added protection.
HOW MUCH WILL IT COST ?
The price of power flushing your central heating system including all chemicals will depend on the size of your property and the number of radiators on your system.
Just call us on 0800 8 247 585 or 0333 444 8 247 and book your heating system in for a powerflush.
We charge £480.00 Inc Vat for the first 8 radiators then an extra £42.00 Inc Vat per additional radiator, we are fully qualified and insured to carry out the powerflush and to work on your boiler/heating system if need be, unlike some of the other companies possibly offering a cheaper service. BEWARE!!!
All our charges are Inclusive of Vat at 20%
NEW BOILER INSTALLATIONS FITTED TO EXISTING SYSTEM!
Boiler manufactures insist that the old central heating system should be thoroughly flushed according to BS7593 : 2006 before installing a new boiler failure to do so could invalidate your manufacturers warranty, and could damage your boiler, kamco clearflow power flushing is far more effective than traditional methods and ensures that the boiler installation complies with ‘Best Practice’ standards. The modern boiler of today is developed to minimise fuel costs and pollution they have compact heat exchangers with very small waterways which can easily become blocked if the water is dirty.
Shaw’s plumbing and heating Power Flush all types of central heating systems in and around the following areas: